JT&T Products

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge used should be 4 gauges...

Replacement bolt and nut for utility and garden tractors. Fits Group U1 batteries. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Tin plated copper braid. Fits up to 3/8" stud. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Closed top is made of stainless steel sintered metal and has 3/8”-16 UNC thread and 9/16” hex head. Open top is made of stainless steel and has 9/16” hex head. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Converts 3/8” stud type terminals to standard post type terminals. Used as an adapter for group hook-up batteries or to convert stud type commercial batteries for use with post type battery cables. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Crimp and Solder Seal terminals feature a band of solder above the connection. After crimping normally, apply heat to activate the heat shrink. The low melt solder will flow into the connection. This provides the best possible connection - no loss of conductivity and is stronger than the wires themselves. JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after...

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

For 6 to 1 GA applications Lead battery terminal, for side bolt style mounting Bolts lock firmly from left or right side Lead alloy Threaded clamp avoids pull out Steel insert avoids stripping Can hold cable or strap Removeable clamping plate ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

For 2 to 4/0 GA applications Lead battery terminal, for top post style mounting Bolts lock firmly from left or right side Lead alloy Threaded clamp avoids pull out Steel insert avoids stripping Can hold cable or strap Removeable clamping plate ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

For 6 to 1 GA applications Lead battery terminal, for top post style mounting Bolts lock firmly from left or right side Lead alloy Threaded clamp avoids pull out Steel insert avoids stripping Can hold cable or strap Removeable clamping plate ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Made in the USA with 3M heat shrink tubing.The best way to connect multiple wires. This terminal features 4x the standard adhesive - this allows the sealant to get down between the wires and prevent any contaminants from entering. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov See Additional Info tab for demonstration video.

JT&T's Rubber Insulated Clamps are made with cold rolled steel and have a 1/4" mounting hole. Attributes include soft-touch, durability, resistance to heat and various fluids. Rubber is an excellent insulator for electrical installation and provides a consistant thickness throughout. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

• Jacketed Trailer Wire is Black PVC Insulated & is constructed of top grade stranded copper wire made in the USA. • Wire is rated at 60 Volts with a temperature rating of 80°C (176°F). RoHS compliant & conductors meet or exceed S.A.E. J1128 specifications. • Especially designed for reliability as an integral part of the brake safety system. • 1st color listed is in the midnight position - rotation is clockwise. Jacketed- Jacketed Trailer Wire Comes on a Spool. ⚠ WARNING: Cancer and...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge used should be 4 gauges...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge used should be 4 gauges...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full...

JT&T Products offers a full line of terminals made from vinyl (P.V.C), nylon and heat shrink.