JT&T Products

Double Contact Socket Assembly. Includes Mounting Plate. Fits 3/4" (19.05mm) Hole. Uses bulb #1034, 1154, 1157. Trying to find your Socket? Please read this article before calling.? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

Fits 1/2" Hole, works with 2650E and 2950F panel mounts. Heavy Duty Toggle Switch, rated at 25a @ 12v. SPDT /  Single Position Dual Throw,  On/On, Marine, 3 x screw terminals. JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches.

Use with three terminal sealed beam headlights or flashers Also available in High Temp (300C) JT&T #2789F Uses halogen bulbs #9003, H4 Leads are approx. 6" long Trying to find your Socket? Please read this article before calling.

Use with three terminal sealed beam headlights or flashers. Housing is made of UREA. Uses halogen bulbs #9003, H4. The wires are not marked, but look to be 14GA Leads are approx. 6" long Trying to find your Socket? Please read this article before calling.? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

S.P.D.T. 5-Pin Terminals w/ Resistor for Voltage Spike Protection. 12Volt DC (Coil) & 40/30AMP 14Volt DC (Continuous). This is a General Purpose Automotive Change-Over-Relay w/ Plastic Body & Mounting Bracket. Mates w/ JT&T #2842F. Trying to find your Socket? Please read this article before calling.? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

S.P.D.T. 5-Pin Terminals w/ Resistor for Voltage Spike Protection. 12Volt DC (Coil) & 40/30AMP 14Volt DC (Continuous). This is a General Purpose Automotive Change-Over-Relay w/ Plastic Body & Mounting Bracket. Kit includes Relay, Relay Pigtail, ATC Fuse Holder, 20A ATC Fuse, Six Heat Shrink Butt Connectors, and One Heat Shrink Ring Terminal.See tech article here for wiring information ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

Metri-Pack 150.2 (Pull-To Seat) Series. (3) 20AWG GXL Leads & Weather-Pack Seal. Leads are approx. 9" long (3) Female Pin Terminals in Triangular Pattern. Fits Various Sensors & Switches. Fits GM Sensor #17112679. Fits Ford Sensor #4C3Z-9J460-A. Replaces GM #12102748, 12126473. Replaces Ford #3C3Z-9F838-EA. Replaces AC/Delco #PT375, PT743. Trying to find your Socket? Please read this article before calling.? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

Metri-Pack 150.2 (Pull-To-Seat) Series. (5) 18AWG GXL Leads & Weather-Pack Seal. For GM 2.8L Engines w/ Sequential Fuel Injection. Replaces GM #12085497. Replaces AC/Delco #PT119. Trying to find your Socket? Please read this article before calling.? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov ...

Accessory Power ReceptacleBuilt in cap/sealMarine ratedIncludes approx 5" 14GA wires ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Amphenol AT connectors are compatible with Deutsch DT connectors. These are a great way to create connectors that are durable and sealed. Project kits include all parts needed to make both ends of one 3 wire connector, everything in main photo above - Plugs, receptacle, wedges, and contacts. For use with 16-20 gauge wires. Use open barrel crimping tool like 5000F to crimp contacts.

Pre made Deutsch DT type connectors are the easy way to replace damaged connectors or add a sealed means to disconnect components. Genuine Amphenol components. Tinned SXL wire. Buy as a set or an individual side. Install with regular butt connectors, or with our Crimp and Solder Seal terminals to ensure the best possible connection.

Lead battery terminal with 3 way attachment capability For 6 to 1 GA applications Lead battery terminal, for top post style mounting Bolts lock firmly from left or right side Lead alloy Threaded clamp avoids pull out Steel insert avoids stripping Can hold cable or strap Removeable clamping plate ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Tin plated die cast copper. Thicker wall for stronger crimp. Corrosion resistant. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Emergency Booster / Jumper cable set at a great price.  Cables made from Copper Clad Aluminum wire which does not carry as much amperage, but does make for a lighter, lower cost booster set.  20 Feet long, 4 GA wire.

Emergency Booster / Jumper cable set at a great price.  Cables made from Copper Clad Aluminum wire which does not carry as much amperage, but does make for a lighter, lower cost booster set.  16 Feet long, 6 GA wire.

Emergency Booster / Jumper cable set at a great price. Cables made from Copper Clad Aluminum wire which does not carry as much amperage, but does make for a lighter, lower cost booster set. 12 Feet long, 10 GA wire.

Amphenol AT connectors are compatible with Deutsch DT connectors. These are a great way to create connectors that are durable and sealed. Project kits include all parts needed to make both ends of one 4 wire connector, everything in main photo above - Plugs, receptacle, wedges, and contacts. For use with 16-20 gauge wires. Use open barrel crimping tool like 5000F to crimp contacts.

Pre made Deutsch DT type connectors are the easy way to replace damaged connectors or add a sealed means to disconnect components. Genuine Amphenol components. Tinned SXL wire. Buy as a set or an individual side. Install with regular butt connectors, or with our Crimp and Solder Seal terminals to ensure the best possible connection.

Allows quick connections of heavy gauge wires or battery cables Rotate housing 180 degrees to connect with the other side Includes all parts for both sides of the connection Plated copper lugs snap into housing Color keyed - grey housing only mates with other grey housings Housing body is approx 2"x1.25" ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

TEMPORARILY OUT OF STOCK.Great Multi Purpose tool handles a wide range of common wire cutting, stripping and crimping. ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

For use on non insulated terminals. Double cam increases leverage allowing for easy crimps on high temp terminals. Easy to use release controlled ratchet mechanism ensures consistent quality crimps. Can also be used on insulated terminals, but may damage the insulation. ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Amphenol AT connectors are compatible with Deutsch DT connectors. These are a great way to create connectors that are durable and sealed. Project kits include all parts needed to make both ends of one 6 wire connector, everything in main photo above - Plugs, receptacle, wedges, and contacts. For use with 16-20 gauge wires. Use open barrel crimping tool like 5000F to crimp contacts.

Pre made Deutsch DT type connectors are the easy way to replace damaged connectors or add a sealed means to disconnect components. Genuine Amphenol components. Tinned SXL wire. Buy as a set or an individual side. Install with regular butt connectors, or with our Crimp and Solder Seal terminals to ensure the best possible connection.

HVAC/R Wiring Kit A Large assortment of terminals, twist on connectors, compressor leads and high temp terminals for HVAC/R applications. Sturdy plastic organizer box and product map included. See Specs tab for complete listing of included items. ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov