JT&T Products

⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Allows quick connections of heavy gauge wires or battery cables Rotate housing 180 degrees to connect with the other side Includes all parts for both sides of the connection Plated copper lugs snap into housing Color keyed - grey housing only mates with other grey housings Housing body is approx 2.25x1.5" ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

15 AMP @ 12 Volt - S.P.S.T., Illuminated Push-Pull Switch

Fits 1/2" Hole, SPST/ Single Position, Single Throw. Rated at 16a @ 12v. Fits 2650E and 2950E panel mounts. Three .250 tab terminals. Incandescent bulb

Fits 13/16" Hole, outer edge of face is approx 15/16". SPST / Single Position, Single Throw, rated at 16a @ 12v.

Fits 13/16" Hole, outer edge of face is approx 15/16". SPST / Single Position, Single Throw, rated at 16a @ 12v.

Fits 1/2" round hole, Fits 2650E and 2950F Panel mounts. SPST / Single Position, Single Throw. Rated at 16a @ 12v. Three .250 tab terminals. Incandescent illumination.

Fits 1/2" Hole, SPST/ Single Position, Single Throw. Rated at 16a @ 12v. Fits 2650E and 2950E panel mounts.Three .250 tab terminals.

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Allows quick connections of heavy gauge wires or battery cables Rotate housing 180 degrees to connect with the other side Includes all parts for both sides of the connection Plated copper lugs snap into housing Color keyed - grey housing only mates with other grey housings Housing body is appro 3"x2" ? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Amphenol AT connectors are compatible with Deutsch DT connectors. These are a great way to create connectors that are durable and sealed. Project kits include all parts needed to make both ends of one 2 wire connector, everything in main photo above - Plugs, receptacle, wedges, and contacts. For use with 16-20 gauge wires. Use open barrel crimping tool like 5000F to crimp contacts.

Pre made Deutsch DT type connectors are the easy way to replace damaged connectors or add a sealed means to disconnect components. Genuine Amphenol components. Tinned SXL wire. Buy as a set or an individual side. Install with regular butt connectors, or with our Crimp and Solder Seal terminals to ensure the best possible connection. 

? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

? WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable SPST (On)/Off, LED illuminated. Rests in the 'off' position and is momentary on (pops back to off when released). "Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels available Hole size .83" x 1.46" (22x38mm) ...

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable DPDT (On)/Off/(On), Momentary in both directions. Great for control of a motor that needs to 'out' then stop when released, or 'in' and stop when released."Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels...

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable DPDT On/Off/On, LED illuminated. Off in the middle position, clicks (and stays) to an 'on' position in two directions. "Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels available Hole size .83" x 1.46"...

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable DPDT On/On"Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels available Hole size .83" x 1.46" (22x38mm)

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable DPST On/Off, LED illuminated"Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels available Hole size .83" x 1.46" (22x38mm)

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable SPST On/Off, LED illuminated"Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another.  Labels and panels available Hole size .83" x 1.46" (22x38mm)

Marine rated, sealed IP68 Waterproof, heavy-duty rocker switch - 20A @12VDC or 15A @24VDC, .250 tabs Acutators/lenses are removeable SPDT On/Off/On, LED illuminated. Off in middle position, can be clicked (and will stay) to 'on' in two directions. "Pin" in product name indicates the number of terminals on the back of the switch. Note however, the pin count is not the best way to determine if a switch is interchangeable with another. Labels and panels available Hole size .83" x 1.46"...