JT&T Products

Fits 1/2" Hole, works with 2650E and 2950F panel mounts. Heavy Duty Toggle Switch, rated at 25a @ 12v. SPDT /  Single Position Dual Throw,  On/Off/On, Marine, 3 x screw terminals. JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches.

Fits 1/2" Hole, works with 2650E and 2950F panel mounts. 30 AMP @ 12 Volt D.P.D.T. (Double Pole Double Throw) On/Off/On Heavy Duty Toggle Switch 6 Screw Terminals

Fits 1/2" Hole, works with 2650E and 2950F panel mounts. Switch body is approx .75" x 1.25" Heavy Duty Toggle Switch, rated at 30a @ 12v. DPDT /  Dual Position Dual Throw Momentary On / Off / Momentary On, Marine, 6 x screw terminals. JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches. ...

Heavy Duty all metal construction. SPST /  Single Position Single Throw, Rated at 20a @ 12v, On/Off, 2 x screw terminals JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches.

Fits standard 1/2" - 3/4" stems. Weatherproof switch boot provides dust and moisture protection. Installs over toggle stem and threads on to switch body.

Heavy Duty all metal Toggle Switch, rated at 50a @ 12v. SPST /  Single Position Single Throw,  Fits 1/2" Hole SizeSwitch body is approx 1.25 x .75 x.75"Stem length from mounting surface is approx 1.5"Weighs 1.6 oz On/Off,  2 x screw terminals. JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches. ...

Heavy Duty all metal Toggle Switch, rated at 50a @ 12v. SPDT /  Single Position Dual Throw,  On/Off/On,  3 x screw terminals. JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches.

Fits 1/2" hole and 2650E and 2950F Panel Mounts. Rated at 15a@ 12v, SPST /  Single Position, Single Throw, 2 pre wired 5.5" leads JT&T offers a wide range of products including: sockets, pigtails, toggles & rocker switches.

JT&T's Standard PET Expandable Sleeving expands up to 150% & is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns.  It is used in electronics, automotive, marine & industrial wire harnessing applications where cost efficiency & durability are critical.  The unique braided construction & wide expandability allows quick & easy installation over large connectors & long run wire or cable. ...

JT&T's Flame-Retardant PET Expandable Sleeving expands up to 150% & is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns. It is the perfect choice for electronic & high tech applications where flame retardance & durability are primary concerns. The unique braided construction & wide expandability allows quick & easy installation over large connectors & long run wire or cable. Abrasion & cut resistant; also resists UV radiation, gasoline & other engine chemicals. The...

Key Points: Hi-Temp Resin Saturated Fiberglass sleeve protects delicate components from temperatures up to 648°C (1,200°F). Also called insultherm, this sleeving is densely braided from fiberglass yarns & saturated with high temperature resins. Is tough & durable, maintaining its tight structure under extreme vibration, mechanical stress & temperature variations. Will not melt, burn or support combustion under normal conditions & will remain flexible...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge used should be 4 gauges...

JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used in place of a fuse, only where a fuse cannot be used. When replacing fusible link, the wire gauge used should be 4 gauges...

Kit includes two gray 14 AWG fusible link wires (7"), 2 ring connectors, 2 butt connectors and 2 spade connectors.  JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used...

Kit includes two blue 12 AWG fusible link wires (7"), 2 ring connectors, 2 butt connectors and 2 spade connectors.  JT&T Products; Fusible link wire is designed to "open" a circuit when electrical current overload occurs. This "opening" of the circuit stops the current and prevents damage to electrical instruments or to accessories, and is most often used when the placement of a fuse is not possible. Meets or exceeds S.A.E. J-156 specifications. A fusible link is not intended to be used...

Battery Cable (Starter Cable) is available in with either red or black insulation & in sizes from 6 AWG to 3/0 AWG; full gauge copper conductor. Battery cable is manufactured to meet or exceed S.A.E. J-1127 specifications. RoHS compliant. PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids. For use at 60V or less. Temperature rating of 80°C (176°F). 2 AWG temperature rating is 105°C (221°F). Battery cable is available in 25Ft. or 100Ft. spools. Recommended for...

Made of quality copper conductor with cast antimonial lead universal terminals. Full-gauge stranded copper core is flexible for easy installation and allows maximum current for quick starting. Copper core extends to the end of the plated lug to give a one piece solid construction. Meets SAE standards, PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Made of quality copper conductor with cast antimonial lead universal terminals. Full-gauge stranded copper core is flexible for easy installation and allows maximum current for quick starting. Copper core extends to the end of the plated lug to give a one piece solid construction. Meets SAE standards, PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Made of quality copper conductor with cast antimonial lead universal terminals. Full-gauge stranded copper core is flexible for easy installation and allows maximum current for quick starting. Copper core extends to the end of the plated lug to give a one piece solid construction. Meets SAE standards, PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Made of quality copper conductor with cast antimonial lead universal terminals. Full-gauge stranded copper core is flexible for easy installation and allows maximum current for quick starting. Copper core extends to the end of the plated lug to give a one piece solid construction. Meets SAE standards, PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Made of quality copper conductor with cast antimonial lead universal terminals. Full-gauge stranded copper core is flexible for easy installation and allows maximum current for quick starting. Copper core extends to the end of the plated lug to give a one piece solid construction. Meets SAE standards, PVC insulation is resistant to chemicals, cracking, abrasion, weather, oil, and acids.   ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; Speaker wire is made with top grade copper wire, PVC insulated and has a clear coat with tracer. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing. Made in the USA. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov