Sleeving is a great way to clean up the appearance of an engine compartment while also providing protection to wires and hoses from heat, wear and solvents.


Products 1-40 of 40
Show
Aluminized Fiberglass Sleeving (Tubing)
JT&T Products

• Aluminum laminated fiberglass sleeving creates a heat resistant buffer between high temperature environments & the wires, hoses & cables that run through them. • Sleeving has been laboratory tested to temperatures up to 648°C (1,200°F) without burning, delaminating or any other degrading effects. • Resistant against abrasion, gasoline, chemicals & deflects radiant heat. • Cuts easily with regular scissors. • Wall Thickness: 0.025” (+/- 0.006”) •Halogen Free.  ...

Braided Semi Rigid "F6" Split Wrap Sleeving Braided Semi Rigid "F6" Split Wrap Sleeving
JT&T Products

F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.) The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter)...

Black Silicone Coated Fiberglass Sleeving OR Fire Flex.
JT&T Products Item #: 4215F -

Key Points: Made to withstand heat in sensitive areas up to 260°C (500°F) and short term fire exposure up to 537°C (1,000°F). Also called Fire Flex, this sleeving is densely braided from fiberglass yarns & coated with silicone, which makes a fire resistant shield. Silicone jacketed fiberglass sleeving is the choice of professionals in racing & other industries where protection from constant hight temperatures is mandatory. Used on fuel & hydraulic lines, exhaust pipes, coolant hoses to...

Black Braided Fiberglass Sleeving
JT&T Products Item #: 4221F -

Key Points: Hi-Temp Resin Saturated Fiberglass sleeve protects delicate components from temperatures up to 648°C (1,200°F). Also called insultherm, this sleeving is densely braided from fiberglass yarns & saturated with high temperature resins. Is tough & durable, maintaining its tight structure under extreme vibration, mechanical stress & temperature variations. Will not melt, burn or support combustion under normal conditions & will remain flexible...

CMKO (CMK0.00BK) Black - Case Mod® Kit - 19 Pcs. computer case mod
Item #: CMK0 -

JT&T (CMK0) - Deluxe Case Mod Sleeving Kit, Black After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive & chrome colors, to manage and customize the wires, cables and hoses in their supercharged custom cases. Kit...

CMK1 (CCM0.00SV) Chrome Metallic - Case Mod® Kit - 18 Pcs. computer case mod.
Item #: CMK1 -

JT&T (CMK1) - Deluxe Case Mod Sleeving Kit, Chrome Metallic After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases. Kit...

CMK9 (CMK0.00CB) Carbon - Case Mod® Kit - 19 Pcs. computer case mod
Item #: CMK9 -

JT&T (CMK9) - Deluxe Case Mod Sleeving Kit, Carbon After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases. Kit includes:...

CMKN2 (CMK0.00NR) Neon Red - Case Mod® Kit - 19 Pcs. • UV Reactive Sleeving
Item #: CMKN2 -

JT&T (CMKN2) - Deluxe UV Reactive Case Mod Sleeving Kit, Neon Red After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases. Kit...

CMKN4 (CMK0.00_P) Purple - Case Mod® Kit - 19 Pcs.
Item #: CMKN4 -

JT&T (CMKN4) - Deluxe Case Mod Sleeving Kit, Purple After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases. Kit includes:...

CMKN5 (CMK0.00NG) Neon Green - Case Mod® Kit - 19 Pcs. • UV Reactive Sleeving
Item #: CMKN5 -

JT&T (CMKN5) - Deluxe UV Reactive Case Mod Sleeving Kit, Neon Green After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases....

CMKN6 (CMK0.00NB) Neon Blue - Case Mod® Kit - 19 Pcs. • UV Reactive Sleeving
Item #: CMKN6 -

JT&T (CMKN6) - Deluxe UV Reactive Case Mod Sleeving Kit, Neon Blue After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases....

CMKN7 (CMK0.00NY) Neon Yellow - Case Mod® Kit - 19 Pcs. • UV Reactive Sleeving
Item #: CMKN7 -

JT&T (CMKN7) - Deluxe UV Reactive Case Mod Sleeving Kit, Neon Yellow After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases....

CMKN8 (CMK0.00NP) Neon Pink - Case Mod® Kit - 19 Pcs. • UV Reactive Sleeving
Item #: CMKN8 -

JT&T (CMKN8) - Deluxe UV Reactive Case Mod Sleeving Kit, Neon Pink After the flashing fan lights, the neon glow, the custom water-cooled case and the supercharged components, the final touch for computer case customization is "modding" the cables that connect everything. Our Case Mod customization provides computer enthusiasts with many products to choose from, including UV reactive colors, to manage and customize the wires, cables and hoses in their supercharged custom cases....

expandable sleeving, flame retardant, wire loom, tubing,
JT&T Products Item #: 4101C-ZZZ -

JT&T's Flame-Retardant PET Expandable Sleeving expands up to 150% & is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns. It is the perfect choice for electronic & high tech applications where flame retardance & durability are primary concerns. The unique braided construction & wide expandability allows quick & easy installation over large connectors & long run wire or cable. Abrasion & cut resistant; also resists UV radiation, gasoline & other engine chemicals. The...

expandable sleeving, wire loom, tubing,
JT&T Products Item #: 4113-0-ZZZ -

JT&T's Standard PET Expandable Sleeving expands up to 150% & is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns.  It is used in electronics, automotive, marine & industrial wire harnessing applications where cost efficiency & durability are critical.  The unique braided construction & wide expandability allows quick & easy installation over large connectors & long run wire or cable. ...

expandable sleeving, wire loom, tubing,
JT&T Products

Bulk lengths may be special order and have a 2-3 week lead time. Please call if you'd like to confirm availability.JT&T's Clean-Cut PET Expandable Sleeving expands up to 150% & is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns. Has increased braid density for fuller coverage. It is used in electronics, automotive, marine & industrial wire harnessing applications & is ideal for situations where access to a hot knife is impossible. The unique braided construction & wide...

Thermashield T6 High Temp Wrap Thermashield T6 High Temp Wrap
JT&T Products

ThermashieldT6 is designed for ease of installation when component disassembly isn’t practical. Just wrap the pre-formed, split flexible tube around any component and seal the sides with the high temperature adhesive strip to provide protection from hot pipes and engine components. The highly reflective aluminized exterior, combined with the insulating fiberglass interior, protects delicate wire bundles, cables and lines from damage caused by nearby exhaust pipes, headers or other heat...

Wire Split Loom Feed Tools Wire Loom Feed Tools
New!
JT&T Products

Installation Made Easy Use with 'Split Loom-Flex Guard' and any other split tubing or wrap sizes from 1/4" thru 1-1/2" Use with wires, cables & hoses up to 4 gauge. You can use any tool on larger size tubing (1/2" tool on 5/8" tubing for instance), but you will be limited by the volume of wires you can insert at once. It does not work well to use a tool on smaller tubing See specs tab for instructions. ...

Split Loom (Flex-Guard) Tubing
Flex-Guard

Split Loom although lightweight, is a bulky item that is very expensive to ship. We're sorry, but the bulk 3200ft boxes incur a $10 shipping surcharge per item. This will be included in the final shipping cost of your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge. JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring...

3/16" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4270F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing
Flex-Guard

Split Loom although lightweight, is a bulky item that is very expensive to ship and are not included in our normal free shipping. We're sorry, but bulk boxes of 1900ft incur a $20 shipping surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated tube used to provide protection to a...

1/4" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4271F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing
Flex-Guard

Split Loom although lightweight, is a bulky item that is very expensive to ship and does not qualify for our normal free shipping. We're sorry, but bulk rolls of 1100ft incur a $20 shipping surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated tube used to provide protection to a wire...

3/8" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4272F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing

Split Loom although lightweight, is a bulky item that is very expensive to ship and are not included in our normal free shipping. We're sorry, but 100ft. rolls incur a $10 shipping surcharge and bulk 800ft rolls incur a $20 surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated tube used...

1/2" Asphalt-Coated Fabric Loom
Spotlight!
JT&T Products Item #: 4273F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing
Flex-Guard

Split Loom although lightweight, is a bulky item that is very expensive to ship and are not included in our normal free shipping. We're sorry, but 100ft rolls incur a $10 shipping surcharge and bulk 550/600 ft rolls incur a $20 shipping surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a...

5/8" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4274F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing

Split Loom although lightweight, is a very bulky item that is very expensive to ship and are not included in our normal free shipping. We're sorry, but 25ft rolls incur a $10 shipping surcharge, and 100-350ft rolls incur a $20 surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated...

3/4" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4275F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing

Split Loom although lightweight, is a very bulky item that is very expensive to ship and is not included in our normal free shipping. We're sorry, but 25ft rolls incur a $10 shipping surcharge and 100 - 250ft rolls incur a $20 surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated tube...

1" Asphalt-Coated Fabric Loom
JT&T Products Item #: 4276F-ZZZ -

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

Split Loom (Flex-Guard) Tubing

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but 25ft. rolls incur a $5 shipping surcharge, and 150ft rolls incur a $10 surcharge per item. This will be included in the final shipping cost of your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible,...

Split Loom (Flex-Guard) Tubing

Split Loom although lightweight, is a very bulky item that is very expensive to ship and is not included in our normal free shipping. We're sorry, but 100ft rolls incur a $20 shipping surcharge per item. This will be included in the final shipping cost of your order.  JT&T’s Polyethylene Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The tubing is a corrugated tube used to provide protection to a wire harness...

1/4" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing 1/4" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a bulky item that is very expensive to ship. We're sorry, but the bulk 3200ft boxes incur a $10 shipping surcharge per item. This will be included in the final shipping cost of your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge. JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies....

3/8" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing 3/8" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but rolls 25ft. or greater incur a $5 shipping surcharge per item. This will be listed as a 'Handling Fee' in your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for wiring assemblies. The...

1/2" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing  1/2" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but rolls of 100ft. incur a $5 shipping surcharge per item, and bulk 1100 ft rolls incur a $10 surcharge. This will be listed as a 'Handling Fee' in your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant...

5/8" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing 5/8" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but rolls of 100ft. incur a $5 shipping surcharge and bulk rolls inclure a $10 surcharge per item. This will be listed as a 'Handling Fee' in your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant...

3/4" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing 3/4" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but rolls of 100ft. incur a $5 shipping surcharge and 600ft rolls a $10 surcharge per item. This will be listed as a 'Handling Fee' in your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible, crush-resistant protection for...

1" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing 1" Diameter NYLON Split Wire Loom Flex-Guard Convoluted Tubing
Flex-Guard

Split Loom although lightweight, is a very bulky item that is very expensive to ship. We're sorry, but rolls of 25ft. incur a $5 shipping surcharge and 100ft or greater rolls incur a $10 surcharge per item. This will be listed as a 'Handling Fee' in your order. We apologize for this and are working with our shipping providers to find a solution that will allow us to remove this extra charge.JT&T’s Nylon Flex-Guard Convoluted Tubing (Split Loom) is designed to provide a flexible,...